1/2'' Non return Valve

[smithers]

I am in need of a 1/2'' Non return Valve for the delivery pipe from the Injector to the clack valve. I am looking for a traditional pattern one rather than a modern equivalent. A Jenkins would be preferable but will consider anything.

Regards

James

[weidner]

A reasonably chunky looking modern one is the Spirax Sarco LCV 1 , available from 1/2" upwards . Should cost you about £40 . My 3/4" one certainly works well on my pump delivery . This is a piston type lift valve , with spring , all metallic parts . Google it .

[8_10 Brass Cleaner]

You can buy then from RS online for £31 plus the extras

[smithers]

Thanks for the information Chaps, I have had a look at the ones you mention. it is not quite a pretty as I had hoped, I will keep looking for an original, but may come back to your suggestion.

[mugglesquop]

Originally Posted by 8_10 Brass Cleaner

You can buy then from RS online for £31 plus the extras

They are also sold by Pipeline merchants (Watkins and Powis are the local one to me and authorised distributor of Spirax). RS tends to be a bit more expensive usually.