Original Burrell Works Drawings

[Mr B]

Hi All

I have a collection of 78 drawings nearly all on linen from Burrells.

I've had them a while now, but think its time to move them on.

In the first instance, I'm looking for a sensible offer for the whole lot to keep them together. I've sorted them into groups and all have been photographed. There are generally in good used condition. one or two are very faded and all have the odd knocks, creases and a few tears but nothing serious in the main. Some of them are very nice indeed.

Its a rare collection, you don't often see original ex-works material.

If nobody fancies the lot at the right money, I'll take offers on the groups, and individually on the 'Misc' and 'Road Loco' sections. Following that I'll bung them all on Ebay individually.

Please PM me on here or Facebook for further discussion / details

List as follows (width x height is approx) - and before someone comments, the measurements are metric as the person doing the measuring doesn't work in imperial

General 11 Drawings
No.3 Standard Pins 675x500
No.66 Lamp Irons 5,6,7 & 8hp 680x530
No.72 / 758 Curtains and Awning (Paper) 660x485
No.72 / 3801 Curtains & Awning, 6hp RL Blackie 675x500
No.72 / A8 Curtains & Awning, Summers Wagon 675x500
No.73 Tender General Arrangement 1030x665
No.3353 Brake Show 430x410
No.5200 Sprung Drawbar for Traction Engine Dugdale 750x470
No.5220 Clasp for Old Spring Engines 640x640
No.5223 Govenor Pulley Bevel Wheel (Tatty) 520x410
No.90 Bushes Countershaft Bracket 680x500

Road Locos & TE's 15 Drawings
No.11 Spring Trough 8hp (11/10/1920) 1010x690
No.3356 Arrangement of Awning up to Chimney 6hp Traction 09/03/01 870x670
No.3361 Hind Road Wheel 8hp Traction Engine James 20/03/08 980x720
No.3368 Arrangement for Rope Pulley & Winding Drum for Dredging Purposes 8hp Traction Mournement & Ray 31/03/08 740x670
No.3614 Left Hand Dynamo Rail 8hp Road Loco Holland 910x605
No.3621 Details of Treble Spur Brake Gear 6hp & 7hp Taction Engines 24/03/09 790x650
No.3625 High Pressure Eccentrics & Straps 8hp DCC RL 22/06/09 990x710
No.3663 Hind Road Wheel 7hp RL Selby 08/06/09 1000x700
No.3668 Right Hand Crankshaft Bracket 6 & 7hp Traction Engines 15/06/09 770x640
No.3670 Right Hand Crankshaft Bracket 8hp Traction Engine 17/06/09 970x720
No.3681 Hind Axle Cap 7hp Road Loco (Paper) 470x480
No.7205 Left Hand Hind Wheel for Rubber Tyres 8hp RL 04/12/25 1070x720
No.7207 Bevel Wheel & Crane Spindle Bracket 8hp RL Screen No.4039 700x550
No.7230 Countershaft 8hp Road Loco Bath & Portland No.4038 690x450
No.7284 Fire Door Lever 8hp Road Loco No.4039 690x470

Devonshires 4 Drawings
No.3387 Devonshire Compensating Gear (Very faded) 740x700
No.3389 Countershaft Brack Devonshire Traction Engine 01/06/08 820x720
No.3397 Clutch Gear Devonshire Traction Engine 11/06/08 820x700
No.3393 Shafts & Axles for Devonshire Traction Engine 430x630

5hp Engines 28 Drawings
No.12 Countershaft 5hp RL 700x530
No.13 Front Axle 5hp T & RL 670x500
No.18 Chimney Bottom 5hp (01/02/21) 1000x680
No.22 Trough Hind Spring 5hp (11/10/20) 1000x670
No.26 Firebox Wrappet Plate 5hp RL 660x510
No.31 Left Hand Horn 675x525
No.32 Plate Left Horn 2spd 5hp RL 690x520
No.33 5hp Left Hand Horn 675x500
No.35 Plate Right Horn 2spd 5hp RL
No.40 Hind Axle 5hp RL 750x530
No.49 Slide Valves 5hp 650x520
No.52 Hind Road Wheel 5hp T 04/01/21 1040x700
No.53 RH Crankshaft Bracket 5hp 2spd T &RL 1000x720
No.58 Clutch Bracket 5hp 3spd 13/12/20 1000x700
No.62 Anchor for 16' Hind Road Wheels 5hp 2 & 3 speed T 780x520
No.68 Wheel Front Road 5hp T & RL 22/09/20 1000x690
No.74 Tender Side Plate RH 5hp T 660x500
No.75 Tender Side Plate LH 5hp T 680x500
No.76 Back Plate for Tender 5hp T 630x500
No.77 Tender End Plate 5hp T 660x510
No.78 Tender Foot Plate 5hp T 700x510
No.79 Plate Side Draw Bar 5hp T 650x510
No.80 Plate Side Draw Bar 5hp T 690x500
No.81 Draw Bars 5hp T 650 x 530
No.89 Countershaft Bracket 5hp T 2 or 3 Speed 660x480
No.94 Left Hand Crankshaft Bracket 5hp 15/11/20 1070x720
No.93 Countershaft 5hp T 2 & 3 Speed 690x510
No.72 Hind Axle 5hp T 670x510

Rollers 20 Drawings
No.3667 Front Roller Class A Convertible 12/06/09 1000x700
No.5213 Front Roller Class A & B Rollers 11/09/22 710x700
No.5216 Hind Roller Class A Road Roller 920x510
No.5225 Distance Collar to Replace Scarified Cheek Class A Roller 440x330
No.5234 Boiler Tank & Box Brackets Class B Roller No.2237 600x440
No.6677 Crank Bracket RH Class A DC DG Road Roller No.3961 720x600
No.6678 Countershaft, Hind Axle & Screw for Class A Roller No.3961 500x750
No.6679 Flywheel Class A Roller No.3961 500x670
No.6680 Winding Drum & Main Spur Ring Class A Roller 640x450
No.6681 Main Spur Pinion for Class A Roller No.3961
No.6682 Front Fork Class A Road Rollers 680x530
No.6685 Flange & Screw LF End Countershaft Class A Roller No.3961 410x550
No.6686 Arrangement for Flywheel Brake & Details Class A Road Roller 860x720
No.6689 Flywheel Class A Road Roller 720x550
No.6683 Hind Roller with 5'6 1/2" x 1'4" renewable rims plated for Class A Roller No.3961 960x700
No.7259 Boiler Drawing No.4040 Class A Roller 680x520
No.7259 Hind Axle Bracket Class A Roller 710x520
No.3664 Class A Roller Fork Arrangement Burgoyne Bros (Faded) 800x570
No.6684 Front Roller Class A 550x680
No.7261 Steerage for 10ton Double Geared Class A Road Roller 19/01/26 890x700

[Mr B]

Sold.