7/8 x 12 tpi tap

[Stuart H]

I am looking for a 7/8 x 12 tpi tap or a suggested supplier.
Thanks
Stu.

[Paul30013]

Have you tried Tracey Tools? They are usually pretty good, reasonable prices too. Just google them for their contact details I dont have them to hand at the minute.

Paul.

[Stuart H]

Thanks Paul,
Tracy tools do list a 7/8 x 12 but they have none in stock and are unlikly to get any in. They did have a die which is a good start. I could buy a new stay tap of the right size but at £250 seems a bit much when a "short" tap would do.
Thanks for your help
Regards
Stu.

[Paul30013]

There is another company that I cant think of the name of that will make taps to order, I get home next week, I'll try to remember to dig out their details, making to order sounds expensive but with a guide of 250 quid you never know!

Paul.

[mudlid]

Stuart
have you checked Fleabay..
I have bought some odd sie taps from australia before now and they have been here within a week and have been relatively cheap

[avelingporter]

Stu, check the store at BB, think I saw one!

[froudy70]

South coast steam tell Barry graham said to call, he will have something.

[tubeit]

Originally Posted by Stuart H

I am looking for a 7/8 x 12 tpi tap or a suggested supplier.
Thanks
Stu.

Hi I can get you a tap. However it will be 60' not witworth. Is this a staytap or a short stud tap? regards bob

[Terrytoolpath]

Hi
12 tpi seems a bit of an oddball, if its 7/8 bsf (11tpi) you require I can help

Terry

[Stuart H]

Thanks for all your assistance. I have now sourced a sutable tap.
Regards
Stu.