Traction-Talk

Traction-Talk (https://www.tractiontalkforum.com/index.php)
-   Show Reports (https://www.tractiontalkforum.com/forumdisplay.php?f=7)
-   -   Barleylands 2012 (https://www.tractiontalkforum.com/showthread.php?t=23871)

Arfursteam 9th September 2012 04:22 PM

Barleylands 2012
 
Here is something different I found, a miniature ploughing engine.

According to an information board it is 6 inch to 1 foot replica of an 1862 Kitson & Hewitson twin cylinder.

The full size engine was made in Leeds and was rated at 10nhp

Enjoy

Arthur


http://i1159.photobucket.com/albums/...Z-DSCF3991.jpg

UJ2225 9th September 2012 09:07 PM

And didnt it sound good ploughing?

Jim

1882 10th September 2012 01:18 PM

That is absolutly fantastic.

40155 10th September 2012 05:53 PM

10 Attachment(s)
If I can add a few more photos onto this thread, for me the two miniature ploughing engines working in amongst the full size engines were one of the absolute highlights of this excellent show. They looked and sounded superb, and I think drew a lot of interest from the public. Barleylands was excellent as usual, although engine numbers were slightly down I understand, but with really good working areas. Really good to meet you Arthur, also Mark and Ruth Vine again (many thanks for the tea and cake and the trundle round on the roller!), and an extra thanks to Jim Stanley for taking me over to his shed especially after the rally to see the excellent progress being made on "Shamrock".

mark vine 12th September 2012 05:51 PM

I could not miss this photo, seen at the same rally, but unaware of the conection, until I looked through the program, Both engines worked for Bomford and Evershed.
Who would have guessed that two engines from the Worcestershire area would be in the Essex, Norfolk area in there time of preservation.


http://www.tractiontalkforum.com/pic...pictureid=8442


Mark.

davy 12th September 2012 06:15 PM

Very interesting photo,s by 40155 at Barleylands of the half size ploughing engines, and single furrow plough.

00000 12th September 2012 08:48 PM

Lovely things! Thats the sort of minitures they ought to be making!

the highwayman 13th September 2012 05:34 AM

Does any-one have a picture of Burrell 2473 'Black Bess' working the reciprocating sawbench that they could post please? This was the first time that this engine has been oin the belt in about 60 years, and also the first time that I have set to the belt, I actually made a better job of it on Saturday than I did Sunday

40155 13th September 2012 05:56 AM

1 Attachment(s)
Quote:

Originally Posted by the highwayman (Post 227062)
Does any-one have a picture of Burrell 2473 'Black Bess' working the reciprocating sawbench that they could post please? This was the first time that this engine has been oin the belt in about 60 years, and also the first time that I have set to the belt, I actually made a better job of it on Saturday than I did Sunday

Not a great photo I'm afraid, but here you go.......

Arfursteam 13th September 2012 10:36 AM

Here is one I took, but unfortunately she was not on the belt.

Arthur


http://i1159.photobucket.com/albums/...2473NO5914.jpg


All times are GMT. The time now is 04:10 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.