Eddison living van large wheel wanted
 

I am looking for one cast wheel for my Eddison living van.
The wheel is 34.5” diameter and 4.25” wide. The axle hole is approx 2”
One of mine is cracked and so before having it welded I thought I’d ask if anyone had one kicking about.

Regards wayne

Don’t weld it , Boiler makes stitch it.

if it were me, id fabricate one out of steel

We had cracked one on the museum van. I welded it up then machined the outside diam true and shrunk on a steel tyre. This seems to have improved thing somewhat.

Or shrink on steel tyres to all the wheels.

You need someone who can weld cast iron.

Devcon is good

I do know a guy, but he’s too busy restoring his engine single handedly.

Cast Iron Welding Services or Metalock.

That looks like our old van. The wheel should have a shrunk-on tyre like all the other wheels. The one that was on it was too thin and stretched. Make it at least 1/4" thick and probably thicker. Measure round the circumference and subtract at least a 1/4 before welding it up and then shrink it on like a cart tyre.