Traction-Talk

Traction-Talk (https://www.tractiontalkforum.com/index.php)
-   Wanted Adverts (https://www.tractiontalkforum.com/forumdisplay.php?f=11)
-   -   5/16 / 8 mm rivet snap (https://www.tractiontalkforum.com/showthread.php?t=45611)

CL engineering 17th November 2019 08:33 PM

5/16 / 8 mm rivet snap
 
Hi All
Can any one help me? Am looking for a 5/16 / 8mm rivet snap to fit a small rivet gun needs to have a 0.6665" shank
Thanks Chris

geo 17th November 2019 11:40 PM

Chris, the shank size should be .680" round, you could make one by machining the profile you need in a short chipping hammer chisel blank.

Johnny White

CL engineering 18th November 2019 09:35 AM

Quote:

Originally Posted by geo (Post 417792)
Chris, the shank size should be .680" round, you could make one by machining the profile you need in a short chipping hammer chisel blank.

Johnny White

Thanks for the info, where could I get a chipping hammer blank?

froudy70 18th November 2019 10:18 AM

What size Chris?

geo 20th November 2019 12:28 AM

I can let you have one FOC, but you will have to collect.

Johnny

CL engineering 20th November 2019 07:35 AM

Quote:

Originally Posted by geo (Post 417835)
I can let you have one FOC, but you will have to collect.

Johnny

Hi
Will give you a ring later
Thanks Chris


All times are GMT. The time now is 08:50 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.