Traction-Talk

Traction-Talk (https://www.tractiontalkforum.com/index.php)
-   Wanted Adverts (https://www.tractiontalkforum.com/forumdisplay.php?f=11)
-   -   fillter (https://www.tractiontalkforum.com/showthread.php?t=47397)

junk box 5th April 2021 07:55 PM

fillter
 
Hi has anyone got a source or some good second hand suction strainer filters x2 off for tender injector pickup pipes mine are long gone thank you in advance Ben. 07810825534

weidner 5th April 2021 11:21 PM

Quote:

Originally Posted by junk box (Post 434075)
Hi has anyone got a source or some good second hand suction strainer filters x2 off for tender injector pickup pipes mine are long gone thank you in advance Ben. 07810825534

BSS do nice ones new , and cheap too , but don't accept one with too fine a mesh filter . If BSS kick up about a change of mesh , you can get a similar mesh which will fit the BSS in line filter from Power and Motion of Daventry , for a fraction 9( ? £3 )of what BSS will want to change it ( about £20 ). Too fine a mesh means that the thing will not feed the injector with less than about a half tank of water , because the effective head of water will not overcome the surface tension of the mesh .
I have one new BSS pattern here on my desk if you want to give me a ring on 01327 - 87 77 86 .

ferguson_tom 6th April 2021 11:43 AM

https://www.beaumanor.com/Products/0049000f00100016

junk box 6th April 2021 08:04 PM

fillter
 
Thanks Bob and Tom. Bob does the one you have a nylon end i am not to keen on that i know it should be ok just rater have brass or aluminum thanks ben.

weidner 6th April 2021 10:37 PM

The one which I have has a stainless mesh cylinder which is easily removable for cleaning via a plug without any dismantling of pipework . My old BSS catalogue lists it's equivalent as a bronze Y type strainer , product code 23010615 , which you can probably find in their catalogue on line . Mine is branded TFP , which you can probably find by Googling , and incorporates an additional hex drain plug . The mesh which is too fine and which I replaced is a 20 mesh .


All times are GMT. The time now is 10:06 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.