Traction-Talk - 3/8 BSP 2 Bolt Flange Wanted

Traction-Talk (https://www.tractiontalkforum.com/index.php)

- Wanted Adverts (https://www.tractiontalkforum.com/forumdisplay.php?f=11)

- - 3/8 BSP 2 Bolt Flange Wanted (https://www.tractiontalkforum.com/showthread.php?t=46394)

8_10 Brass Cleaner

11th June 2020 04:13 PM

3/8 BSP 2 Bolt Flange Wanted

Wanted

2 bolt 3/8'' BSP Flange wanted as per photo.

3/8'' BSP Female thread.

2No 3/8'' clearance holes on 1 7/8'' PCD.

I will happily modify a 4 bolt flange if you have one that will suit.

Its for a steam fitting on a water lifter. Bronze or Steel preferred. The one pictured is FUBAR due to cracking.

http://www.steamscenes.org.uk/tti/20/008_1856.jpg

Hedd Jones

PM, 07871 577 132 or hedd_jones@yahoo.co.uk

DTM537

11th June 2020 06:19 PM

Have a blank cut from plate, then machine the boss, drill and tap the centre hole and lastly drill the two bolt holes.

8_10 Brass Cleaner

11th June 2020 09:26 PM

Quote:

Originally Posted by DTM537 (Post 424526)

Have a blank cut from plate, then machine the boss, drill and tap the centre hole and lastly drill the two bolt holes.

Ill make one if one does not become availible as a result of the advert. No rush.

All times are GMT. The time now is 09:20 PM.